JLH Digital Technology Co., Limited.
Main products:CISS,Ink Cartridge,Heat Press,Mug
Products
Contact Us
  • Contact Person : Ms. Jia Topjlh
  • Company Name : JLH Digital Technology Co., Limited.
  • Tel : 86-755-83840246
  • Fax : 86-755-83840248
  • Address : Guangdong,shenzhen,6/F,Fanen Building,Yuehua road,ShangMeiLin,Futian district.
  • Country/Region : China
  • Zip : 518049

water transfer printing paper

water transfer printing paper
Product Detailed
water transfer printing paper Size: A4 Color: transparent/ white based Packing: 10sheets/bag Weight: 175g

water transfer printing paper

Inkjet water transfer paper: transparent type , white background type

 

Transparent type: this kind can be used in crystal, glass,ceramic,diskette, mental bottle, bamboo  and something is transparent, white, or light color item.

 

White background type: this kind can be used in products that is not transparent or the products' background is white. It also can be used

in deep color products or black ones to cover their original color.

Code

Product Name

Notes

Unit

XZT-2

Transparent

Suitable for general

inkjet printer

Bag

XZW-2

White

Bag

XZT-3 NEW

Transparent

Suitable for

Laser jet printer

Bag

XZW-3

White

Bag

Instruction:

Take out Material-A Transparent printable film (With Red Flash is printing side) Material-B with water glue (Back print WATER PAPER). It’s Suitable for most of desktop inkjet printer including original and compatible bulk ink, like water dye ink or pigment ink. For Canon, Lexmark, HP, Epson use. With following manual you can transfer to all different material like Mugs, Plates, Woods, Plastic, Glass, Metal, Very large application for working with Transfer King II.

 

conventional size: A4, A3.

 

printing instructions: 

choose one picture you design by yourself or any picture you download from the Internet.print it (any inkjet printer and any ink can be used directly, laminating machine is no need.)use a hair drier to dry it or natural air dry(5 minutes)using the transparent gloss paint to spray evenly in the pattern surface.(you can get transparent gloss paint in the paint shop.)dry it and cut it.put it into the water. After 30-60s, remove the transfer membrame 0.5cm first from the base paper.put the 0.5cm picture first onto the surface then pull the base paper away slowly.clean the bubble under the transfer membrame with a brush. use soft cloth or absorbent paper to scrape the surface.If time is limited you can use a oven to dry it 10-15 minutes with 100°C. If the material is plastic, 50-70°C is all right. If time is enough, hair drier also can be OK.

Attention:

1.     Make sure the printing side and set into mirror before printing.

2.     After printing, use dryer to dry completely (Otherwise the film will be difficult to remove)

3.     Object should be to well cleaned. Water and bubble should be expel completely or it will affect and product.

4.     Oven baking 120C-140C (15-20min) no need to spray protection lacquer.

After Baking or Drying the item can be unscratched. Apply lacquer can improve the unscratched ability) 

Good after sales service

Shipment and sample quality tracking incude lifetime.Any small problem happening in our products will be solved at the most prompt time.We always offer relative technical support/consultant.Quick response,all your inquiry will be

replied within 24hours.

 

It can be transferred on vary object: ceramic, plastic, glass, wood, metal, etc.

Other paper we do

water transfer printing paper



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.